Thermal Drone Camera – What It Is And How It Works

thermal drone camera

Thermal drones are very popular among many industries and law enforcement agencies today. These types of cameras make use of a heat-sensitive camera that can detect heat from the bottom of the lens and transmit it to a receiver located on the other end. The receiver can then send a signal to a computer which is connected to the camera’s recording system.

More About Thermal Drone Camera

Thermal sensors are quite useful for discovering the temperature of certain objects, for identifying hidden objects or measuring the temperature of faraway objects. For instance, thermal sensors can be used to locate the exact location of buried underground gas reserves. Thermal sensors are also great for helping people identify hot spots. There are a few types of thermal sensors.

Thermal passive cameras are very popular and are considered one of the most effective types of cameras on the market today. This type of thermal drone camera has a small rectangular box that is fitted with three panels. All three panels contain an inverted lens. When the lens is rotated, it allows the sensor to detect the temperature underneath the surface of the lens. This type of thermal sensor is very easy to setup.

Thermal active cameras, on the other hand, are similar to passive thermal sensors but they allow infrared light to pass through the lens instead of ultraviolet light. Infrared light is much more sensitive than ultraviolet light and so it can penetrate the lens at a much greater distance. These types of cameras allow you to see through the lens even if the lighting conditions are bad.

Unique Features Of Thermal Drone

Thermal fog cameras have a lens that contains a reflective coating. The lens is covered with a thin layer of water vapor and when the temperature of the fog rises, the lens captures this heat. The captured heat is then measured by a thermocouple and sent to a receiver.

A thermal camera is ideal for monitoring heat sources in a warehouse. The lens captures the heat coming from the warehouse and sends it to a remote receiver where it can display the heat map on your monitor.

To take thermal pictures with a drone camera, you will need a laptop computer. You will need a digital camera such as a DSLR or a digital video camcorder. If you have a tripod, you can even mount the camera to your vehicle.

Learning To Operate The Drone

Before using a thermal drone camera in your business, you will need to get some training on how to use and control it. This will ensure that your camera is in the right position and orientation at all times.

When you are setting up your drone camera, you will need to ensure that it is pointed directly at your target. Never point the camera in a way that will not capture the necessary data. Always aim the camera to the center of your target and then rotate your camera in the direction of the target.


When looking at the target, look through your binoculars, look to the right of your target. Your aim at the target with your eye for any areas of the target that appear darker than the surrounding area. When looking right through your binoculars, make sure that you look for shadows.

Subscribe to our monthly Newsletter
Subscribe to our monthly Newsletter